| Technical Data Sheet of RJ Single Impeller Agitation Tank | ||||||||
| Model | Tank Diameter(mm) | Tank Height(mm) | Effective Volume(m³) | Impeller Diameter(mm) | Impeller Rotational Speed(rpm) | Motor | Weight(kg) | |
| Model | Power(kW) | |||||||
| RJ05 | 500 | 500 | 0.078 | 240 | 530 | Y80M₂-4 | 0.75 | 160 |
| RJ07 | 750 | 750 | 0.26 | 240 | 530 | Y80M₂-4 | 0.75 | 228 |
| RJ10 | 1000 | 1000 | 0.58 | 240 | 530 | Y90S-4 | 1.1 | 350 |
| RJ12 | 1200 | 1200 | 1.14 | 400 | 320 | Y112M-6 | 2.2 | 765 |
| RJ15 | 1500 | 1500 | 2.2 | 400 | 320 | Y132S-6 | 3 | 1360 |
| RJ20 | 2000 | 2000 | 5.5 | 550 | 230 | Y132M₂-6 | 5.5 | 1800 |
| RJ25 | 2500 | 2500 | 11 | 625 | 230 | Y160M-6 | 7.5 | 2270 |
| RJ30 | 3000 | 3000 | 19.1 | 800 | 200 | Y225S-8 | 18.5 | 4296 |
| RJ35 | 3500 | 3500 | 29.5 | 850 | 190 | Y225M-8 | 22 | 5580 |
| RJ40 | 4000 | 4000 | 46 | 1000 | 160 | Y250M-8 | 30 | 8036 |
Product Features
This product is the most commonly used standard type of agitation tank. The impeller is located at the lower end of the circulation cylinder, where slurry and reagents are added into the cylinder for mixing. Based on experimental research, our company has designed a new type of impeller that differs from the traditional Type I and Type II impellers, offering higher mixing efficiency.
Selection Guidelines
-Rubber impellers, nylon impellers, and other materials can be manufactured according to user requirements. Special instructions must be provided when placing an order.
-The relative positions of the motor, feed inlet, and discharge outlet can be arranged according to user requirements. Generally, related components are assembled on site during installation.
-RJ agitation tanks are available in two types: conical-bottom and flat-bottom. The conical-bottom type must be specified when ordering.
